C&S Design by SM
PLEASE MAKE SURE YOUR HAVE A FIRM UNDERSTANDING OF THE SIZES BEFORE PURCHASING.
Hmong Motif Decal - WHITE PERMANENT DECAL
Regular price
$3.00
- Sizes: approximately 3.5"x3.5", 4.5"x4.5", 5.5"x5.5", 6"x6", 7"x7", 8"x8"
- White decal with matte finish
- Permanent vinyl (DO NOT peel after application. It will ruin the decal.)
- Picture frame does not come with decal
- Decal comes with transfer tape
Highly textured surfaces and bricks are NOT RECOMMENDED.
- White decal with matte finish
- Permanent vinyl (DO NOT peel after application. It will ruin the decal.)
- Picture frame does not come with decal
- Decal comes with transfer tape
Highly textured surfaces and bricks are NOT RECOMMENDED.
These are permanent vinyl so we do not recommend you applying it to any surfaces that you have the intention to remove later. Peeling with ruin the vinyl.
PLEASE MAKE SURE YOUR HAVE A FIRM UNDERSTANDING OF THE SIZES BEFORE PURCHASING.
INSTRUCTIONS:
- Prep your surface. Make sure your surface is clean.
- Before peeling the transfer tape from the backing, do a quick scraping to make sure the transfer tape is adhered to the decal. (check to make sure that all pieces are in place. Especially, detailed design with tiny pieces. If not, move it in place before applying to surface)
- Place decal on desired surface. (make sure it is at position before placing decal on surface)
- Use a craft squeegee or a credit card to firmly scrape the vinyl onto the desired surface. Start from the middle and scrape outward. Make sure you go over the entire surface.
- At the corner, slowly peel the transfer tape off the surface. Be careful not to lift up any part of the decal. If any part shall lift, then put the transfer tape back on the surface and scrape some more.
- Prep your surface. Make sure your surface is clean.
- Before peeling the transfer tape from the backing, do a quick scraping to make sure the transfer tape is adhered to the decal. (check to make sure that all pieces are in place. Especially, detailed design with tiny pieces. If not, move it in place before applying to surface)
- Place decal on desired surface. (make sure it is at position before placing decal on surface)
- Use a craft squeegee or a credit card to firmly scrape the vinyl onto the desired surface. Start from the middle and scrape outward. Make sure you go over the entire surface.
- At the corner, slowly peel the transfer tape off the surface. Be careful not to lift up any part of the decal. If any part shall lift, then put the transfer tape back on the surface and scrape some more.